---
title: Burst with Multiple Filters
slug: reports/burst-with-multiple-filters
description: Run report bursts with multiple filters in Unaric Reports to deliver personalized documents to different recipients.
docTags: 
createdAt: 2026-02-03T17:40:33.802Z
---

In this example, you will set up a *burst* report with two filters on the *regular* report.

:::hint{type="info"}
This example continues the [Simple Burst example](docId\:zaCjW9a2zlAaiCICAj1Vx). If this is your first time doing a burst, check the other example first to learn the basics.
:::

## How it works

There are different ways you can set up your non-*burst* (r*egular*, s*ource*, or *data record*) report, depending on whether you are using a Salesforce report or a Custom Report, you will choose the best option for you. They all end up with the same result.

The first filter you will add will always be the standard burst **Filter Value** which comes from the **Record Identifier Field** selected on the **Burst Report** item. In this example, it is **Contact ID**.

![](https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/h8U8eFrVUYxFbvXS_Pc5S_record-identifier-field.png)

On the non-burst report you will add this by putting in the `{{FILTER_VALUE}}` token as shown in the examples below. The other tokens will come from the *burst* report. To find those you will go to the run report page of the *burst* report and select the icon in the upper right-hand corner.

::Image[]{src="https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/vqygTaITNfFhBpAzGkZ1H_burst-filter-variables.png" size="74" width="1100" height="860" position="center" showCaption="false"}

While this example will show how to add two filters, you can add as many filters as you require.

## Report setup

### Salesforce report

When using a Salesforce report you can go to the **Run report** page, at the top you can add a new **Filter Configuration**.

::Image[]{src="https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/cXRM1vXqK066Otyrm8sAs_report-configuration-filters.png" size="70" width="1300" height="497" position="center" showCaption="false"}

Then when creating the Solution you will be able to select this new filter configuration after you select your report.

![](https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/tnYcVPOA_UXRDOUgxAvLD_select-filter.png)

### Custom Report using custom SOQL

When using a custom report with your own custom query, you can just add the filters right into the query.

![](https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/kVX_lbuRk9Oifae03ikLL_custom-report-soql.png)

### Custom Report using the Custom Report Wizard

When using a custom report that was created with the wizard, if you navigate to the filters step you can add your filters there.

![](https://api.archbee.com/api/optimize/10Nod6Ww95R3dPr0k0TCJ/C4qiQ7O-kIRe3w4jU3N78_custom-report-wizard.png)